Joyetech Cuboid 200W TC Box Mod

Joyetech Cuboid 200W TC Box Mod

Parameters

Output Wattage: 1 - 200W
Modes Available: VW/VT/Bypass/TCR/Logo/Preheat
Resistance Range: 0.05 - 1.5ohm for VT Mode;0.1 - 3.5ohm for VW/Bypass Mode
Temperature Range: 100 - 315℃/ 200 - 600℉
Battery: 3 x 18650 battery (continuous discharge current ≥ 25A)

It comes with

• 1 x Joyetech Cuboid 200 MOD
• 1 x Cuboid 200 skin
• 1 x USB Cable
• 1 x User Manual & Warranty Card

  Power On/ Off: Put the device up side down. Press the battery cover and push it open. Put three 18650 batteries inside and push the cover back. Press the fire button 5 times in quick succession to turn the device on or off.

  Vaping: Hold the fire button and inhale through the mouthpiece. Release the fire button and exhale. Please choose the correct mode and adjust the wattage to a proper range according to your atomizer before use. 

  Charging & Upgrading: Please always use married high-rate 18650 cells, don't mix with different brands. We kindly suggest you take the cells and charge them in a stand alone charger. You can download the new firmware at Joyetech site. 

  Switch the mode: Press the fire button 3 times to enter into the mode options. Then press "+" button to switch between VW/BYPASS/TC(Ni,Ti,SS)/TCR(M1,M2, M3)modes. Press the fire button to confirm. 

  Stealth function: When the device is on, simultaneously hold the fire button and "-" regulatory button to turn on/off the stealth function. When the stealth is on, you can still vape with the display off. 

  Key lock function: When the device is on, simultaneously press the "+" and "-" buttons to turn on/off the button lock function. 

  Switch the display: When the device is off, simultaneously press "+" and "-" buttons to turn the display upside down. Repeat it to turn it back.